Description
Davey Silensor Pro Swimming Pool Pump – Single Phase
Are you after the quietest of pool pumps? The name says it all… Davey Silensor Pro.
The patented water-cooled motor makes Silensor so quiet, you can use it at any time of the day or night.
The Silensor Pro range also comes with a variable speed dial on the motor top to reduce your electrical consumption to a minimum, without losing performance. The Pro comes with 10 filter speed options, plus a backwash mode – easy controls to set & forget.
The range offers an optional extra large leaf basket for fewer cleans, giving you the perfect single speed pool pump for any residential use.
The Davey Silensor range of Swimming Pool Pumps uses a unique to Davey water-cooled motor for super quiet operation with high efficiency.
With a ‘plastic’ outer casing, the Davey Silensor is not effected by chemical water splashes like other pool pumps, comes with a large leaf basket model, and are so quiet you can run them at any time, day or night, without upsetting the neighbours.
With a “One Size” fits all model with a 1.5HP pump in standard mode, with a backwash boost max of 1.76HP, this one pump is all you need – ideal for all domestic pools up to 140 M³, with large pressure rating up to 24metres head, and flow rates to 460litres per minute, the Davey Silensor can comfortably run filtration systems, cleaners and backwash residential media filters with ease.
Specifications:Suitable For Salt Water Pools
Unique Davey Water Cooled Super Silent 50dba Motor at speed 1
4.5 Litre Leaf Basket
Loss of Prime Protection Built Into The Pump – Minimises Damage If The Pump Runs Dry
Delivery: Up To 18 M³/H
Head: Up To 24 M
Power Supply: Single Phase 50 Hz Only
Variable Power: From 0.1 Kw Up To 1.3 Kw
Maximum Operating Pressure: 2 Bar
Efficient Design: Heats The Pool Water As It Cools The Motor, Saves You Money, Heats Your Pool.
The Pump is configured with internal 63mm female solvent pipe unions, and is supplied with 1.5″ female parallel bushes if required. The unions incorporate an o ring to ensure a water tight seal onto the pump body.
The Pump is pre-wired with a 2m long cable with the cable ends ready to be terminate by your approved electrical contractor into your pump isolator supply.
Please note that most domestic pumps are Single Phase 240v pumps. Three Phase 415V pumps are very uncommon in a domestic environment. If you are unsure, you must check with your qualified Electrician who can advise you on your requirements.
| Pump Power Conversions | |||
| KiloWatts | Horse Power | ||
| 0.25 Kw | 0.33 HP | ||
| 0.375 Kw | 0.5 HP | ||
| 0.55 Kw | 0.75 HP | ||
| 0.75 Kw | 1.0 HP | ||
| 1.12 Kw | 1.5 HP | ||
| 1.5 Kw | 2.0 HP | ||
| 2.25 Kw | 3.0 HP | ||
We recommend you use P.T.F.E tape or LA-CO Slic-Tite to apply to the male thread on your pump unions. please order your unions if required from the pipework section. The 1 1/2″ male threaded unions are ideal if you are connecting your remaining pipework with normal solvent weld fittings.
